Kenwood TK-D240 Service Manual page 45

Item Condition
5. 1) Adj item: [Open Squelch
Open (Analog Wide 4k)]
Squelch 2) Adj item:[Low], [Low'], [Cen-
(Analog ter], [High'], [High]
Wide 4k) SSG output:12dB SINAD level
+1dB (MOD:1kHz/±2.4kHz)
5. 1) Adj item: [Open Squelch
Open (Analog Wide 5k)]
Squelch 2) Adj item:[Low], [Low'], [Cen-
(Analog ter], [High'], [High]
Wide 5k) SSG output:12dB SINAD level
+1dB (MOD:1kHz/±3.0kHz)
6.* 1) Adj item:[Low RSSI (Analog
Low RSSI Narrow)]
2) Adj item:[Low], [Low'], [Cen-
ter], [High'], [High]
SSG output :-118dBm
(0.28uV) (MOD:1kHz/
±1.5kHz)
7.* 1) Adj item: [High RSSI (Ana-
High RSSI log Narrow)]
2) Adj item: [Low], [Low'],
[Center], [High'], [High]
SSG output : -80dBm (22.4uV)
(MOD:1kHz/±1.5kHz)
8. 1) Adj item: [Open Squelch
Tight (Analog Narrow)]
Squelch 2) Adj item:[Low], [Low'], [Cen-
(Analog ter], [High'], [High]
Narrow) SSG output:12dB SINAD level
+5dB (MOD:1kHz/±1.5kHz)
8. 1) Adj item: [Open Squelch
Tight (Analog Wide 4k)]
Squelch 2) Adj item:[Low], [Low'], [Cen-
(Analog ter], [High'], [High]
Wide 4k) SSG output:12dB SINAD level
+5dB (MOD:1kHz/±2.4kHz)
8. 1) Adj item: [Open Squelch
Tight (Analog Wide 5k)]
Squelch 2) Adj item:[Low], [Low'], [Cen-
(Analog ter], [High'], [High]
Wide 5k) SSG output:12dB SINAD level
+5dB (MOD:1kHz/±3.0kHz)
Measurement
Test- Unit Terminal Unit Parts
equipment
SSG ANT
Distortion SP/MIC
meter connec-
Oscilloscope tor
SSG ANT
Distortion SP/MIC
meter connec-
Oscilloscope tor
SSG ANT
Distortion SP/MIC
meter connec-
Oscilloscope tor
SSG ANT
Distortion SP/MIC
meter connec-
Oscilloscope tor
SSG ANT
Distortion SP/MIC
meter connec-
Oscilloscope tor
SSG ANT
Distortion SP/MIC
meter connec-
Oscilloscope tor
SSG ANT
Distortion SP/MIC
meter connec-
Oscilloscope tor
Adjustment
Method
[FPU] After input signal from
[<][>] SSG, press [Apply]
button to store the ad-
justment value.
[FPU] After input signal from
[<][>] SSG, press [Apply]
button to store the ad-
justment value.
[FPU] After input signal from
[<][>] SSG, press [Apply]
button to store the ad-
justment value.
[FPU] After input signal from
[<][>] SSG, press [Apply]
button to store the ad-
justment value.
[FPU] After input signal from
[<][>] SSG, press [Apply]
button to store the ad-
justment value.
[FPU] After input signal from
[<][>] SSG, press [Apply]
button to store the ad-
justment value.
[FPU] After input signal from
[<][>] SSG, press [Apply]
button to store the ad-
justment value.
(No.RA035<Rev.001>)1-45
Specifications
/Remarks
*: Because Low
RSSI at -118dBm
(Analog Wide 5k,
Wide 4k and DMR) is
adjusted by adjust-
ing Low RSSI at -
118dBm (Analog
Narrow), it is not nec-
essary to adjust Low
RSSI at -118dBm
(Analog Wide 5k,
Wide 4k and DMR).
*: Because High
RSSI at -80dBm (An-
alog Wide 5k, Wide
4k and DMR) is ad-
justed by adjusting
High RSSI at -
80dBm (Analog Nar-
row), it is not neces-
sary to adjust High
RSSI at -80dBm (An-
alog Wide 5k, Wide
4k and DMR).