Kenwood TK-D240 Service Manual page 27

Item Condition
PC test mode
8. DQT De- 1) Adj item:
viation [DQT Deviation (Analog Nar-
row)]
*3
Deviation meter LPF : 3kHz
HPF : OFF
2) Adj item: [Low], [Low'],
[Center], [High'], [High]
PTT: Press [Transmit] button.
Press [Apply] button to store
the adjustment value.
1) Adj item:
[DQT Deviation(Analog
Wide)]
2) Adj item: [Low], [Low'],
[Center], [High'], [High]
PTT: Press [Transmit] button.
Press [Apply] button to store
the adjustment value.
9. Single 1) Adj item:
Tone Devia- [Single Tone Deviation (Ana-
tion log Narrow)]
Deviation meter LPF : 15kHz
*3
HPF : OFF
2) Adj item: [Low], [Low'],
[Center], [High'], [High]
PTT: Press [Transmit] button.
Press [Apply] button to store
the adjustment value.
1) Adj item: [Single Tone Devi-
ation (Analog Wide)]
2) Adj item: [Low], [Low'],
[Center], [High'], [High]
PTT: Press [Transmit] button.
Press [Apply] button to store
the adjustment value.
*3: Refer to the "4.6.1 Necessary Deviation adjustment item for each signaling and mode" table.
10.VOX 1 1) Adj item: [VOX 1]
AG : 1kHz/45mV at MIC termi-
nal
Press [Apply] button to store
the adjustment value.
11.VOX 10 1) Adj item: [VOX 10]
AG : 1kHz/3mV at MIC termi-
nal
Press [Apply] button to store
the adjustment value.
12. Battery 1) Adj item:
warning lev- [Battery Warning Level]
el writing PTT: Press
[Transmit] button.
Measurement
Test- Unit Terminal
equipment
Deviation Panel ANT
meter
Oscillo-
scope
Deviation Panel ANT
meter
Oscillo-
scope
Deviation Panel ANT
meter
Oscillo-
scope
Deviation Panel ANT
meter
Oscillo-
scope
AG Panel
AF VM
AG Panel
AF VM
Power Panel ANT
meter DVM BATT
terminal
Adjustment
Unit Parts Method
Panel [FPU] 0.35kHz
[<][>]
Panel [FPU] 0.75kHz
[<][>]
Panel [FPU] 1.50kHz
[<][>]
Panel [FPU] 3.00kHz
[<][>]
Panel After apply signal
from AG,press [Apply]
button to store the ad-
justment value.
Panel After apply signal
from AG,press [Apply]
button to store the ad-
justment value.
Press the PTT switch
or [Transmit] button
on the PC window.
Apply 6.20V to battery
terminal.
Confirm that one pre-
determined numeric
in the range 1 to 4096
appears.
Press [Apply] button
to store the adjust-
ment value.
Specifications
/Remarks
0.35kHz
±0.05kHz
0.75kHz
±0.05kHz
1.50kHz
±0.05kHz
3.00kHz
±0.05kHz
(No.RA035<Rev.001>)1-27