Reboot; Reset - TP-Link ARCHER CR700 User Manual

2) Click Browse to select the path name where you save the downloaded file on the computer
into the File Name blank.
3) Click the Upgrade button.
4) The modem router will reboot while the upgrading has been finished.
Note:
1) New firmware versions are posted at http://www.tp-link.com and can be downloaded for free.
There is no need to upgrade the firmware unless the new firmware has a new feature you
want to use. However, when experiencing problems caused by the modem router rather than
the configuration, you can try to upgrade the firmware.
2) When you upgrade the modem router's firmware, you may lose its current configurations, so
before upgrading the firmware please write down some of your customized settings to avoid
losing important settings.
3) Do not turn off the modem router or press the Reset button while the firmware is being
upgraded. Loss of power during the upgrade could damage the modem router.
4) The firmware version must correspond to the hardware.
5) The upgrade process takes a few moments and the modem router restarts automatically
when the upgrade is complete.

3.3.8 Reboot

Choose menu "Basic" → "Reboot", and then you can click the Reboot button to reboot the
modem router.

3.3.9 Reset

Choose menu "Basic → Reset", and then and you can restore the configurations of the modem
router to factory defaults.
Click the Restore button to reset all configuration settings to their default values.
•
The default Username: admin
•
The default Password: admin
•
The default Subnet Mask: 255.255.255.0
Figure 3-9
Figure 3-10
14
Archer CR700 User Guide