The Back Panel - TP-Link ARCHER CR700 User Manual

(LAN)
(Wireless)
(WPS)
(USB on the
back panel)

1.3.2 The Back Panel

RESET: There are two ways to reset the modem router's factory defaults.
Method one: With the modem router powered on, use a pin to press and hold the Reset
button for at least 8-10 seconds. And the modem router will reboot to its factory default
settings.
Method two: Restore the default setting from
Management.
Off There is no device connected to this LAN port.
Wireless is enabled. The modem router is working on 2.4GHz/5
On
GHz radio band.
Off Wireless is disabled.
A wireless device has been successfully added to the network by
On
WPS function.
WPS handshaking is in process and will continue for about 2
Flash minutes. Please press the WPS button on other wireless devices
that you want to add to the network while the LED is flashing.
A wireless device has failed to be added to the network by WPS
Off
function.
Off No storage device or printer is plugged into the USB port.
On A storage device or printer has connected to the USB port.
Figure 1-2
Archer CR700
"3.3.9 Reset" of the modem router's Web-based
4
User Guide