Dmz Host; Rip Setup - TP-Link ARCHER CR700 User Manual

3.4.7 DMZ Host

Choose menu "Advanced→DMZ Host", and then you can view and configure DMZ host in the
screen (shown in Figure 3-18).The DMZ host feature allows one local host to be exposed to the
Internet for a special-purpose service such as Internet gaming or videoconferencing. The modem
router forwards packets of all services to the DMZ host. Any PC whose port is being forwarded
must have its DHCP client function disabled and should have a new static IP Address assigned to
it because its IP Address may be changed when using the DHCP function.
To assign a computer or server to be a DMZ server:
1. Enter the IP address of a local PC that is set to be DMZ host in the DMZ Address field.
2. Click the Apply button.

3.4.8 RIP Setup

Choose "Advanced" "RIP Setup", you can see the RIP (Routing Information Protocol) screen
which allows you to configure the RIP.
Figure 3-17
Figure 3-18
18
Archer CR700 User Guide