Basic; Primary Network - TP-Link ARCHER CR700 User Manual

Ac1750 wireless dual band gigabit docsis 3.0 cable modem router

Hide thumbs Also See for ARCHER CR700:

Table of Contents

3.8.1 Basic

Choose menu "Wireless 2.4GHz" → "Basic", you can configure the basic settings for the

wireless network of 2.4GHz on this page.

802.11 Mode

Select the desired mode. It is strongly recommended that you set the Mode to

802.11b/g/n mixed, and all of 802.11b, 802.11g, and 802.11n wireless stations can connect

to the modem router.

Bandwidth: Select the channel width from the drop-down list . The default setting is Auto,

which can adjust the channel width for your clients automatically.

Note:

If 11b/g mixed is selected in the 802.11 Mode field, the Bandwidth value will become 20M, which

is unable to be changed.

Control Channel: Select the channel you want to use from the drop-down List of Channel.

This field determines which operating frequency will be used. It is not necessary to change the

wireless channel unless you notice interference problems with another nearby access point.

Click Save to save your settings.

This page allows configuration of the Primary Wireless Network and its security settings.

Archer CR700

Figure 3-30

User Guide

Table of Contents