Table of Contents
Advertisement
10. SETUPS
10.1. fun-Link (HDMI CEC)
HOME
A
"Settings"
fun-Link (HDMI CEC) allows integrated system control over HDMI and is part of the HDMI standard. This function may
not work properly depending on the device connected to the unit. When "fun-Link (HDMI CEC)" setting is set to "On" the
functions listed below will be available.
One Touch Play
When the buttons below on the remote control are pressed then operations are performed on this unit, the TV will
automatically be Turned On and switched to the appropriate video Source Input.
Buttons for one touch play:
-
[
(PLAY)], [
(SKIP)], [
-
[TOP MENU], or [POP MENU/MENU] (when a disc is inserted in the unit)
One Touch Standby
When you press and hold [
the power on this unit. When the connected fun-Link (HDMI CEC) compatible display device is Turned Off first, it then
Turns Off the power to this unit.
System Information
Get & Set Menu Language
The unit recognizes the OSD language set on the TV and automatically sets the same language as the Player Menu Language
(OSD menu language) for this unit. "Language" under "Playback" on page 33 for available languages.
•
Feature is available only when "Auto" is selected in the Setup Menu "Language" section in "Settings" while connected
via an HDMI cable.
System Audio Control
When you set your TV to output the audio from the 5.1ch speakers through this unit, you can control the volume level or
mute the audio using TV's remote control. (For more details, refer to the owner's manual of your TV.)
D Note
•
For external input mode, "One Touch Play" is not available.
•
Volume level will be displayed on the TV screen.
•
If you change the speaker setting on your TV to output the audio from TV's speaker, 5.1ch speakers will be muted. (To
restore the volume, use the remote control of this unit.) Only when connected via HDMI cable to TV.
•
When you switch this unit into Standby mode, TV's speaker will be activated automatically. Only when connected via
HDMI cable to TV.
•
Depending on the connected TV, two device names ("MAGNAVOX BD" and "Audio System") may be displayed in the
device list on the TV's menu screen. To select this unit, please select "MAGNAVOX BD". Only when connected via
HDMI cable to TV.
•
If the system audio control does not work properly, please restart the unit.
A
"HDMI"
(SKIP)], [the NUMBER buttons], [HOME]
(POWER-ON)] for 2 seconds, it Turns Off the power on the TV first and then Turns Off
A "fun-Link (HDMI CEC)"
EN - 35
Advertisement
Table of Contents
