Connecting Speakers And Subwoofer - Magnavox MRD430B Owner's Manual

Standard Composite Video Connection (Supports only 480i resolution.)
SPEAKERS ( 3Ω )
REAR FRONT
SUB- FRONT
R L R L
WOOFER CENTER
+
-
• Connect this unit directly to the TV. If a video cable is connected to a VCR then the pictures may be distorted due to
the copyright protection system.

4.3. Connecting Speakers and Subwoofer

SUBWOOFER FRONT
CENTER
1. Connect the bare speaker cable wire ends to the matching color terminals on the speakers.
2. Connect all the speakers and subwoofer to the matching terminals at the rear of the main unit.
Make sure that the colors of the cable wires and terminals match.
3. Confirm that the solid colored wire goes to its matching "+" colored terminal and the black wire goes to the "-" black
colored terminal.
4. Press a colored clamper and insert the solid colored wires to their respective colored terminal.
Then release the clamper when the bare wire end is located so the clamper will clamp the bare wire making a positive
connection.
5. Repeat step 4.
D Note
• To prevent unwanted noise, never place the speakers too close to the main unit, subwoofer, AC power adapter, TV or
any other radiation sources.
• When a disc has 7.1 multi-channel surround sound output then this Home Cinema unit will convert it to 5.1 multi-
channel surround sound output using the Home Cinema speakers.
VIDEO
OUT
VIDEO AUDIO IN
OUT AUX
R
DIGITAL
AUDIO IN
L
COAXIAL
HDMI OUT
SPEAKERS ( 3Ω )
REAR FRONT
SUB- FRONT
R L R L
WOOFER CENTER
REAR
SUB -
FRONT
R
WOOFER CENTER
REAR
RIGHT
Video cable
(not supplied)
VIDEO AUDIO IN
OUT AUX
R
DIGITAL
AUDIO IN
L
COAXIAL
HDMI OUT
FRONT
L R L
1. Press the clamper
and insert the wire.
REAR
LEFT
Your TV
VIDEO IN
2. Release the
clamper.
FRONT FRONT
RIGHT LEFT
EN - 11