Replacing A Drive; Identifying A Faulty Hard Drive - Western Digital My Cloud Mirror User Manual

Replacing a Drive

12

Identifying a Faulty Hard Drive

Replacing a Drive
Rebuilding the Drive
Returning a WD Drive
The My Cloud Mirror device is a limited user-serviceable product that allows you to replace
the hard drives in the enclosure. You can use WD hard drives or another brand's hard drive.
Note:
Important:
assemblies into the unit's enclosure. Visit
base for Knowledge Base Answer ID 8 to get detailed instructions on obtaining a
replacement drive for this product.
Following are instructions for replacing a faulty drive or, if your WD My Cloud Mirror model
did not come with drives, for inserting drives.
Identifying a Faulty Hard Drive
If the LEDs on the unit are flashing or you have received an alert, a hard drive may be faulty.
To determine which drive is faulty, do the following:
1. On the dashboard's navigation panel, click Storage and then Disk Status.
WD MY CLOUD MIRROR PERSONAL CLOUD STORAGE
USER MANUAL
For a complete list of compatible"Returning a WD Drive" on page 135drives, visit
wd.com/mycloudmirror
For best performance, WD recommends inserting WD Red
support.wdc.com and search the knowledge
Replacing a Drive
TM
hard drive
132