Air Distributor With Burning Chamber Stabilizer - Stropuva S7 Technical Passport Installation And Maintenance Instructions

3.2 AIR DISTRIBUTOR WITH BURNING CHAMBER STABILIZER

Burning chamber stabilizer is mounted (fi g. 3), on the smallest part of telescopic air supply
pipe (7) (fi g. 1), it is integral in new boilers. We also developed units for repairs that consist of
two parts. If telescopic air supply pipe (7) (fi g. 1) has three holes, then stabilizer is locked in third
hole with a pin, if it has only one hole, additional hole must be drilled 55mm from the existing
hole. After mounting the stabilizer, air distributor can be mounted (fi g. 3). When burning pellets,
small fi rewood, distributor must be mounted on middle hole, so that space between the end of
air supply pipe (7) (fi g. 1) and distributor would be reduced to 5 – 7 mm.
A) We recommend using distributor with combustion chamber stabilizer (fi g. 3) when burning
fi rewood, briquettes. This burner is included with fi rewood boilers.
*Developer retains the right to alter and improve the construction of air distributor.
B) We recommend using distributor with combustion chamber stabilizer (fi g. 3) when burning
fi rewood, briquettes and pellets. We also recommend using air injection collector (fi g. 2) with this
burner. This distributor is used with "U" and "BIO" boilers.
*Developer retains the right to alter and improve the construction of air distributor.
C) We recommend using distributor with combustion chamber stabilizer (fi g. 3) when burning
peat and coal. We also recommend using air injection collector (fi g. 2) with this burner. This
distributor is used with "U" boilers.
*Developer retains the right to alter and improve the construction of air distributor.
When fuel burns, ash gather under air distributor with combustion chamber stabilizer (fi g. 3),
but it does not obstruct the burn, on the contrary – it protects the part from heat. Do not lift air
distributor with combustion chamber stabilizer (fi g. 3) when it is not necessarily needed,
this way you will increase its lifespan!!!
TECHNICAL PASSPORT INSTALLATION AND MAINTENANCE INSTRUCTIONS
(Figure 3)
Figure 3
7