Power; Status; Home; Away - Honeywell Apex Destiny 4100 User Manual

RK36 KEYP A D - LED's a n d SPE C I AL KEYS
P O WER
On when AC or back-up battery power is present. If AC
power is lost the POWER LED will turn off and the
STATUS LED will flash, and the system will speak
"POWER OFF" one time.
ST A TUS
Flashing when new information is available, solid after
status has been asked for and spoken, and off when no
information is present.
H O M E
On when armed to HOME. Press H to arm to HOME.
A W A Y
On when armed to AWAY. Press A to arm to AWAY.
NI G HT
Both HOME and AWAY LED's are on when armed to
NIGHT. Press H any time system is armed to HOME to
change to NIGHT. Pressing H when system is armed to
NIGHT will change arming back to HOME.
ST A TUS
Pressing this key will cause the system to immediately
speak system status.
M O NIT O R
Pressing this key toggles the system between the three
possible monitor conditions.
Monitor On - System will announce doors and
windows when opened.
Monitor Off - System will not announce doors
and windows when opened.
Beep - System will beep when doors and
windows are opened.
F1 a n d F2
These key's functions are programmable and will be
explained by your installer.
F1 ________________________
F2 ________________________
B A C KLI G HT INTENSITY
You can control the brightness level of the key backlight-
ing. The simultaneous depression of the 4 and 7 keys will
step the backlighting through 7 different levels. Press 4
and 7 simultaneously a number of times until the back-
lighting is totally off. We will define all backlighting off as
level 1. Levels 2 through 7 will take the key backlighting
through 6 progressively brighter levels.
RK36 KEYP A D
G REEN

POWER

YELL O W

STATUS

RED

HOME

G REEN

AWAY

STATUS

MONITOR

F1
F2
7