Honeywell Apex Destiny 4100 User Manual page 11

ARMIN G
A RMIN G THE
SYSTEM T O
NI G HT:( O PTI O N AL)
PUSH THE # O R H
KEY A G A IN.
F O R C E A RMIN G
THE SYSTEM:
PLE A SE N O TE:
10
LED will not light and you will hear the system say
“ZONES OPEN” over the phone or through the speaker
which indicates that the system did NOT arm.
See "Force Arming" to continue.
3. Arming the system to NIGHT: (Optional)
Arm the system to HOME mode. (See item 2)
Push the # or H key again.
The green AWAY LED will light with the red HOME
LED and the system will say “ARMED TO NIGHT”
over the phone and/or through the speaker. When
armed to the NIGHT mode, the perimeter entry delay
zones become instant and your installer may program
some interior zones to be active. If you wish to return
to the HOME mode, simply push the # or H key any
time the system is in the NIGHT mode.
4. Force Arming the system:
If you attempt to arm the system to either HOME or
AWAY but you hear “ZONES OPEN” over the phone
and/or through the speaker and notice that neither the
HOME LED nor the AWAY LED has come on, the
system is NOT armed. However, the system can be
FORCE ARMED.
Push the # or H or
seconds. If arming to HOME, the red HOME LED will
now light and “FORCE ARMED TO HOME” will be
heard indicating that the system is now ARMED to
HOME. If arming to AWAY, the green AWAY LED will
now light and “FORCE ARMED TO AWAY” will be
heard. When FORCE ARMED either to HOME or
AWAY, the yellow STATUS LED will be lit. You can
find out which zones are open by requesting system
status.
PLEASE NOTE: When you FORCE ARM your system,
security is compromised because the open zone will
be ignored by the system. Check with your installer to
determine how the open zone will again be part of the
system.
Zones which operate 24 hours a day such as FIRE and
PANIC are always armed and take priority over all
other types of protection in the system.
*
or A key a second time within 10