Adjust clearance as necessary by replacing tappet
plates (1).
After adjusting, install camshaft cover.
Connect throttle rod and hoses.
Install air cleaner. Install spark plugs.
1.
Tappet plate.
2.
Tool.
IGNITION DISTRIBUTOR
move cap and rotor. Clean and inspect cap and rotor.
Replace cap and rotor as necessary. Lubricate distrib-
utor by adding a little oil thru wick.
1.
Wick.
2.
Contact points.
Check contact points (1) for wear and damage.
Check point gap (2).
Adjust point gap.
Check condenser (3). Replace as necessary.
1.
Contact point.
2.
Pointgap.
3.
Condenser.
Page 10