Page 150
Install rubber bushings in control arm as follows:
Place washer, bushing (1), and spacer (3) on pilot of
tool.
Place tool (2) thru control arm (4). Place bushing (1)
and washer on tool.
1.
Bushing.
2.
Tool.
3.
Spacer.
4.
Control
arm.
Place pilot on tool.
1.
Control arm.
2.
Tool.
3.
Pilotoftool.
4.
Washers.
5.
Rubber bushings.
a press under a load of 2200 to 2600 lbs. (1000 to