Verifying Mac Acl Configurations; Displaying And Clearing Mac Acl Statistics - Cisco Nexus 5000 Series Configuration Manual

Displaying and Clearing MAC ACL Statistics

DETAILED STEPS
Command or Action
Step 1
switch# configure terminal
Step 2
switch(config)# interface {ethernet [chassis/]slot/port
| port-channel channel-number}
Step 3 switch(config-if)# mac port access-group access-list
Step 4 switch# show running-config
Step 5
switch# copy running-config startup-config
Related Topics
•

Verifying MAC ACL Configurations

To display MAC ACL configuration information, perform one of the following tasks:
SUMMARY STEPS
1. switch# show mac access-lists
2. switch# show running-config
3. switch# show running-config interface
DETAILED STEPS
Command or Action
Step 1 switch# show mac access-lists
Step 2 switch# show running-config
Step 3
switch# show running-config interface
Displaying and Clearing MAC ACL Statistics
Use the show mac access-lists command to display statistics about a MAC ACL, including the number of
packets that have matched each rule.
Cisco Nexus 5000 Series NX-OS Security Configuration Guide
88
Creating an IP ACL, page 77
Purpose
Enters configuration mode.
Enters interface configuration mode for the Ethernet
specified interface.
Applies a MAC ACL to the interface.
(Optional)
Displays ACL configuration.
(Optional)
Copies the running configuration to the startup
configuration.
Purpose
Displays the MAC ACL configuration
Displays ACL configuration, including MAC ACLs and the
interfaces that ACLs are applied to.
Displays the configuration of the interface to which you applied
the ACL.
Verifying MAC ACL Configurations
OL-20919-01