Collating Copies; Placing Separator Sheets Between Copies - Lexmark CX310 Series User Manual

Copying
6
Select the number of copies or enter a number on the keypad, and then press
Note: If you want to copy another document, then place it on the scanner glass, press the left or right
arrow button to scroll to Scan the Next Page, and then press
Press the left or right arrow button to scroll to Finish the Job, and then press
7

Collating copies

If you print multiple copies of a document, then you can choose to print each copy as a set (collated) or to print
the copies as groups of pages (not collated).
To select a Collate setting:
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the printer control panel, navigate to:
> Copy >
number on the keypad >
Note: If you want to copy another document, then place it on the scanner glass, press the left or right
arrow button to scroll to Scan the Next Page, and then press
Press the left or right arrow button to scroll to Finish the Job, and then press
4

Placing separator sheets between copies

1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
Collated
> Collate > select the collate setting you want > select the number of copies or enter a
.
.
.
Not collated
.
.
61