Ib Oracle Dual Port Qdr Infiniband Adapter M3; (Expanded On Site) Solaris; Solaris - Fujitsu SPARC M12 Installation Manual

Table B-2 Cards That Support PHP/DR (Oracle Product ID) (continue d)
Category Name
IB Oracle Dual Port
QDR InfiniBand
Adapter M3
*1 Apply the total suspend/resume processing time for the PCI cards to be used.
*2 Supported by Oracle Solaris 11.2 SRU 11.2.2.8.0 and later and Oracle Solaris 10 1/13 150400-18 and later.
*3 Add the suspend/resume processing time for all the PCI cards mounted in the PCI expansion unit to the suspend/resume processing
time for the link card.
*4 In a configuration that uses this card to assign SR-IOV (VF), DR is restricted.
*5 In 2x40 mode or 2x2x10 mode, the root domain must be restarted because the QCU tool is used to switch modes.
*6 Immediately after active addition of the PCI expansion unit, active addition of this card using PHP to the PCI expansion unit is not
possible.
*7 When the suspend/resume processing occurs as the port is being linked up, it takes about 3 seconds with a 1-port card and about 5
seconds with a 2-port card.
*8 To use the Ethernet function (qlcnic driver) in Oracle Solaris 10, apply 149167-07 or later.
*9 The processing time for each card is 10 seconds in Oracle Solaris 11.3 or later and Oracle Solaris 10 1/13 149173-06 or later.
*10 Active addition and active replacement of the PCI expansion unit are not possible.
*11 Supported by Oracle Solaris 11.3 and later.
Factory- Driver PHP: PCI Hot Plug
Mounted Name
Active
When Software
Replace
Shipped Product
ment
(Expanded Name
on Site)
7104073 hermon Not
(7104074) suppo
rted
Appendix B Cards That Support PCI Hot Plug and Dynamic Reconfiguration
DR: Dynamic Reconfiguration
Active Active Active
Addition Replace Addition
ment
Not Not Not
suppo suppo suppo
rted rted rted
Path
Redundancy
Suspend/
Software
Resume
Processing
Time (*1)
- Oracle

Solaris

standard
multi-path
function
(IPMP), and
Oracle
Solaris
standard
multi-path
function
(mpxio)
45