Fujitsu SPARC M12 Installation Manual page 51

Pci card

Hide thumbs Also See for SPARC M12:

Table of Contents

Table B-1 　　 Cards That Support PHP/DR (Fujitsu Product ID) (continued)

Category

Name

Infini

Dual Port

Band

InfiniBand 4x

QDR card

Graphic

Graphics card

*1 The suspend/resume processing time means the time required for the suspend/resume processing per PCI card. Calculate the total

suspend/resume processing time for the PCI cards to be used.

*2 Supported by Oracle Solaris 11.2 SRU 11.2.2.8.0 and later and Oracle Solaris 10 1/13 150400-18 and later.

*3 Add up the suspend/resume processing time for all the PCI cards mounted in the PCI expansion unit.

*4 In a configuration that uses this card to assign SR-IOV (VF), DR is restricted.

*5 In 2x40 mode or 2x2x10 mode, the root domain must be restarted because the QCU tool is used to switch modes.

*6 To use the Ethernet function (qlcnic driver) in Oracle Solaris 10, apply 149167-07 or later.

*7 When the suspend/resume processing occurs as the port is being linked up, it takes about 3 seconds with a 1-port card and about 5

seconds with a 2-port card.

*8 Immediately after active addition of the PCI expansion unit, active addition of this card using PHP to the PCI expansion unit is not

possible.

*9 The processing time for each card is 10 seconds in Oracle Solaris 11.3 or later and Oracle Solaris 10 1/13 149173-06 or later.

*10 Active addition and active replacement of the PCI expansion unit are not possible.

*11 Supported by Oracle Solaris 11.3 and later.

Table B-2 　　 Cards That Support PHP/DR (Oracle Product ID)

Chapters

Table of Contents