Fujitsu SPARC M12 Installation Manual page 19

SPARC M12-2. If there are no ( ), all of the slots are available for mounting. If the
PCI expansion unit is available for mounting, all of the PCI slots in the PCI
expansion unit are available for mounting.
The SPARC M12 has an I/O bandwidth of 8 GB/s per root complex. The
■
bandwidth between the PCI expansion unit and the SPARC M12 is also 8 GB/s.
Therefore, if multiple PCI cards that share root complexes operate at the same
time, each PCI card may not demonstrate the maximum performance. If a
high-speed communication card requires a certain level of performance, secure the
bandwidth with either one of the following actions:
- Instead of mounting in the PCI expansion unit, mount in the PCI slots of the
- Do not mount other PCI cards in the PCI slots of the same root complex.
Table 2-1 Maximum Number of Each Type of Mounted PCI Card: SPARC M12-2 Oracle Solaris 11 (Fujitsu
Product ID)
Type Product Name
Link PCI expansion unit connection card
LAN Dual Gigabit Ethernet card (MMF)
Quad Gigabit Ethernet card (UTP)
Dual 10 Gigabit Ethernet card (10Base-T) SP1X7HF1F
Dual 10 Gigabit Ethernet card
40 Gb Ethernet card
Dual-Channel 10 Gbps FCoE card (for
FCoE
optical cable) (Qlogic)
Dual-Channel 10 Gbps FCoE card (for
Copper Twinax cable) (Qlogic)
Dual-Channel 16 Gbps Fibre Channel
FC
card (SR SFP+)
Dual-Channel 16 Gbps Fibre Channel
card (LR SFP+)
Dual-Channel 16 Gbps Fibre Channel
card (SR SFP+)
SAS 12 Gbps SAS card
SPARC M12-2.
Maximum
Product ID Number
Mounted
Without PCI
expansion unit
- -
SP1X7GD2F 11
SP1X7GQ2F 11
11
SE1X7HE3G 11
SP1X7HG1F 11
SP1X7FAR2F 11
SP1X7FAS2F 11
SP1X7FAA2F 11
SP1X7FAB2F 11
SP1X7FBA2F 11
SP1X7SA3F 11
Chapter 2 PCI Card Mounting Rules for the SPARC M12-2
With PCI expansion unit
1CPU: 3 (Slot#1, #3, #5)
2CPU: 6 (Slot#0, #1, #3,
#4, #5, #7)
1CPU: 41
2CPU: 71
1CPU: 41
2CPU: 71
1CPU: 41
2CPU: 71
1CPU: 41
2CPU: 71
1CPU: 41
2CPU: 71
1CPU: 41
2CPU: 71
1CPU: 41
2CPU: 71
1CPU: 41
2CPU: 71
1CPU: 41
2CPU: 71
1CPU: 41
2CPU: 71
11