Fujitsu SPARC M12 Installation Manual page 49

Appendix B
Cards That Support PCI Hot Plug and
Dynamic Reconfiguration
This appendix describes cards that support PCI Hot Plug and dynamic reconfiguration.
The SPARC M12 on-board PCI slots and the PCI expansion unit support active
replacement and active addition of PCI cards using PCI Hot Plug (PHP).
The SPARC M12 supports the physical partition dynamic reconfiguration (DR)
function. If a card that does not support the dynamic reconfiguration (DR) function is
mounted in a physical partition, the physical partition cannot be dynamically
reconfigured. In that case, perform replacement or maintenance in the inactive state.
Table B-1
lists the PHP/DR supporting cards that have Oracle product IDs.
Table B-1 Cards That Support PHP/DR (Fujitsu Product ID)
Category Name
Link PCI expansion
unit
connection
card
LAN Dual Gigabit
Ethernet card
(MMF)
Quad Gigabit
Ethernet card
(UTP)
Dual 10
Gigabit
Ethernet card
Dual 10
Gigabit
Ethernet card
(10GBase-T)
lists the PHP/DR supporting cards that have Fujitsu product IDs.
Product ID Driver PHP: PCI Hot Plug
Name
Active
Software
Replace
Product
ment
Name
SPME8L None Suppo
K1F rted
SP1X7G igb Suppo
D2F rted
SP1X7G igb Suppo
Q2F rted
SE1X7H ixgbe Suppo
E3G rted
SP1X7H ixgbe Suppo
F1F rted
DR: Dynamic Reconfiguration
Active Active Active
Addition Replace Addition
ment
Suppo Suppo Suppo
rted rted rted
(*2)
Suppo To be supported
rted
Suppo Suppo Suppo
rted rted rted
Suppo Suppo Suppo
rted rted rted
(*4) (*4)
Suppo Suppo Suppo
rted rted rted
(*4) (*4)
Table B-2
Path
Redundancy
Suspend/
Software
Resume
Processing
Time (*1)
0.1 sec. None
(*3)
Oracle
Solaris
standard
multi-path
0.8 sec.
function
(IPMP), or
PRIMECLU
STER GLS
0.4 sec.
4.3A20 or
later
0.4 sec.
41