Fitting The Harness; Starting / Stopping The Engine - Stihl HL-KM Instruction Manual

English / USA

Fitting the Harness

3
Shoulder Strap
: Put on the shoulder strap (1).
: With the hedge cutter attached,
adjust length of strap until the spring
hook (3) is at the same height as
your right hip.
16
1
Full Harness*
: Put on the full harness (2).
: Adjust length until the spring hook
(3) is at the same height as your
right hip.
* see "Guide to Using this Manual"
Starting / Stopping
the Engine
2
3
Starting the Engine
Always follow the starting procedure
outlined in the instruction manual of
basic power tool or CombiEngine you
are using.
:
:
Place the unit on the ground: It must
rest securely on the engine support
and the gearbox.
On units with an adjustable cutter
bar and defined transport positon:
Set the cutter bar to the straight (0°)
position.
HL-KM