Table Of Contents - Stihl HL-KM Instruction Manual

Contents
KombiSystem ................................... 2
Guide to Using this Manual .............. 2
Safety Precautions and
Working Techniques ......................... 3
Using the Hedge Cutter .................. 10
Approved CombiEngines ................ 12
Assembling the Unit ....................... 13
Mounting the CombiTool ................. 13
Adjusting Cutter Bar ....................... 14
Fitting the Harness ......................... 16
Starting / Stopping the Engine ........ 16
Lubricating the Gearbox ................. 17
Storing the Machine ........................ 18
Sharpening the Cutting Blades ....... 18
Main Parts ...................................... 19
Specifications ................................. 20
Maintenance and Repairs ............... 20
STIHl
HL-KM
English / USA
Allow only persons who understand the
manuals of the CombiEngine and hedge
trimmer CombiTool to operate this power
tool combination.
To receive maximum performance and
satisfaction from your STIHL CombiTool,
it is important that you read and
understand the maintenance and safety
precautions, starting on page 3, before
using your CombiTool.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in this
Manual.
!
Warning!
Because this power-tool has a high-
speed working tool some special safety
precautions must be observed to reduce
the risk of personal injury. Careless or
improper use may cause serious or even
fatal injury.
STIHL's philosophy is to continually
improve all of its products. As a result,
engineering changes and improve-
ments are made from time to time. If the
operating characteristics or the
appearance of your attachment differs
from those described in this Manual,
please contact your STIHL dealer for
information and assistance.
1