Table of Contents
Advertisement
Available languages
Available languages
Battery Installation / Replacement
1
Remove the battery cover from
the battery compartment.
Use two identical 1.5V alkaline
batteries, type AAA / LR03.
3
Replace the battery cover.
Adjusting Settings
2
To set date and time
Press the "MEM" button to change the month, then press the "SET" button
and continue with next step. Then set the day, the time system conversion,
the hour and the minute by using the same method. Continue with step 3.
Month Setting
time system conversion
2
Install the batteries so the + (positive)
and - (negative) battery polarities match
the polarities of the battery compartment
as indicated.
+
-
-
+
NOTICE: Use two identical 1.5V
alkaline batteries type AAA / LR03.
NOTICE: DO NOT use rechargeable
batteries.
NOTICE: Replace BOTH batteries
if the low battery symbol displays.
NOTICE: DO NOT leave low batteries
in the battery compartment! They may
leak and cause damage to the unit.
9
Day Setting
Hour Setting
11
Adjusting Settings
1
To set year
1.1 All information will appear on the display when the batteries are installed
for the first time. After 2 seconds the year flashes on the display.
Press the "SET" button and continue with step 2.
1.2 The year appears and flashes after pressing the "SET" button
for 3~4 seconds while the unit is off. Press the "SET" button
again and continue with step 2.
Press the "MEM" button one time to increase one year, twice for
two years, etc. Keep the "MEM" button depressed and the
value quickly increases.
The year can be set between 2012 and 2030.
After displaying 2030, the year will return to 2009.
Adjusting Settings
Minute Setting
3
To set positioning sensor
The Positioning Sensor symbol "
Press the "MEM" button to change the current setting.
If the positioning system is turned on, the LCD will display "
If the positioning system is turned off, the LCD will display "
Press the "SET" button and continue with step 4.
12
10
" will appear.
".
".
Advertisement
Chapters
Table of Contents
