Cirrus SR22 Pilot Operating Handbook page 323

Cirrus Design
SR22
Graphic Restoration
If typical cleaning methods fail to produce satisfactory results, refer to
the recommended restoration products and mixtures below to help
preserve the condition of the graphics on your aircraft.
Do not use abrasive polishes or cutting compounds.
Do not use polish or wax on graphics with a matte or texture
finish.
Initially test restoration products and mixtures on an
inconspicuous area of the graphic to verify they will not cause
damage.
Use an all-purpose cleaner to remove wax or wax residue.
Film or Finish Type
Smooth Gloss
Matte or Satin Texture
Matte White (1080-M10)
Carbon Fiber White Texture
(1080-CF10)
Carbon Fiber or Brushed
Metal Texture
Carbon Fiber Black Texture
(1080-CF12)
Recommended Graphic Restoration Products and Mixtures
P/N 13772-004 P/N 13772-004
Revision 1
• Caution •
• Note •
Product or Mixture
3M™ Perfect-it™ Show Car Paste Wax 39526;
Meguiar's Gold Class™ Carnuaba Plus Premium Liq-
uid Wax
Mixture of two parts isopropyl alcohol to one part water
(mix ratio 2:1)
Depending on the type and degree of contamination to
be removed, use one or more of the following solutions
in the order shown:
1. Hot, soapy water solution
2. Mixture of two parts isopropyl alcohol to one part
water (mix ratio 2:1)
3. Simple Green® All-Purpose Cleaner
4. Household chlorine bleach, followed by a mixture of
two parts isopropyl alcohol to one part water (mix ratio
2:1)
5. Mineral spirits, followed by a mixture of two parts
isopropyl alcohol to one part water (mix ratio 2:1)
3M™ Tire Restorer or Meguiar's Natural Shine Pro-
tectant
Meguiar's Ultimate Black Plastic Restorer
Figure 8-3
Section 8
Handling and Servicing
8-29 8-29