(B)
(A)
(3)
Disassembly: There are three pawls on the fusing cover. Remove the
screws and slide the fusing cover to the right to remove.
The heater lamp is fixed on the fusing cover with a
screw. Slide the fusing cover to the front and remove the
screw, then remove the heater lamp.
Assembly: Put the fusing harness (A) on the heater lamp (B) as shown
in the figure and fix them together. Place the fusing harness
inside the rib (C).
(3)
(4)
AL-1611/AL-1622 DISASSEMBLY AND ASSEMBLY
E. Upper heat roller
∗
(3)
Apply heat-resistive grease (UKOG-0235FCZZ).
F. Separation pawl
(1)
(2)
(3)
11 – 4
∗
(3)
(4)
(1)
(2)
(2)
(3)
(1)