9.8.3 Navigating to a Position Report
The GX2200 has a feature that allows navigation to a received position
report call by using the compass display. Navigating to the position of a posi-
tion report call may be enabled by the procedure below.
1. After the position report call has been
received, press the
2. To start navigating using the compass
display, press and hold the
until the compass page is shown. The
display indicates the distance and direction
o f t h e r e c e i v e d v e s s e l , a n d a l s o t h e
compass indicates the received vessel by
dot ( ) .
9.8.4 Stopping Navigation to a Position Report
1. Press one of the soft keys to show the key selec-
tions.
2. Press the
ing to a the waypoint and the Normal VHF display
will be shown.
9.8.5 Saving a Position Report as a Waypoint
The GX2200 can save a position report call in the radio's memory as a
waypoint.
1. After the position report call has been
received, press the
2. Rotate the CH knob to change the first
letter in the name of the waypoint and press
the
soft key.
3. Repeat step 2 until the WPT name is
entered.
4. Press and hold the
the waypoint into memory.
GX2200
soft key.
key. The radio will stop navigat-
soft key.
soft key to save
Received POS REPORT
Name:Horizon
Category:Routine
Since: 01:03
-POS INFO-
soft key
TO WPT
Received POS REPORT
Name:Horizon
Category:Routine
Since: 01:03
-POS INFO-
TO WPT
ID:123456789
-Waypoint Input-
WPT Name:Horizon
SAVE
ID:123456789
QUIT
Position:
33 33.120
118 06.230
ENT
BACK
QUIT
16
N
W
E
S
16
N
E
W
S
ID:123456789
SAVE
QUIT
-Waypoint Input-
WPT Name:Horizon
ID:123456789
Position:
33 33.120
118 06.230
ENT
BACK
QUIT
Page 77
N
W
N
W