Setting Up Waypoint Directory - Standard Horizon HX870E Owner's Manual

10.1.2 Setting Up Waypoint Directory

Marking a Position
This feature allows the radio to mark the current position of the vessel.
1. Press the MENU key to display "MENU".
2. Select "SETUP" with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Press the CH▼/CH▲ key to select "WAYPOINT
SETUP", then press the [SELECT] soft key.
4. Select "MARK POSITION" with the CH▼/
CH▲ key, then press the [SELECT] soft key.
5. Select "NAME" with the CH▼/CH▲ key, then
press the [SELECT] soft key.
6. Enter the waypoint name by pressing the
CH▼/CH▲ key and the [SELECT] soft key.
When finished entering the name, press the
[FINISH] soft key.
7. If you want to modify the position, select
"POSITION" with the CH▼/CH▲ key, press
the [SELECT] soft key, then enter the new
coordinates.
When finished modifying the position, press
the [FINISH] soft key.
8. Select "SAVE" with the CH▼/CH▲ key, then press the [SELECT] soft key
to save the mark position into memory.
9. Press the CLR key to return to radio operation.
Page 78
DSC SETUP
GM SETUP
WAYPOINT SETUP
CH SETUP
WAYPOINT SETUP
GPS SETUP
MARK POSITION
ATIS SETUP
WAYPOINT DIR.
ROUTE DIR.
BACK
DISPLAY RANGE
ARRIVAL RANGE
ROUTING OPERATION
NAME:
001MARK----------
POSITION:
BACK SELECT
MARK POSITION
NAME:
001MARK----------
BACK
POSITION:
24 ° 25.975
S
118 ° 59.456
W
SAVE
BACK SELECT
SETUP
SELECT
MARK POSITION
24 ° 25.975
S
118 ° 59.456
W
SAVE
SELECT
HX870E