Battery Saver; Strobe Led; Emergency Led - Standard Horizon HX870E Owner's Manual

12.5 BATTERY SAVER

This function allows you to change the battery save mode setting.
1. Press the MENU key to display "MENU".
2. Select "SETUP" with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Select "CONFIGURATION" with the CH▼/
CH▲ key, then press the [SELECT] soft key.
4. Select "BATTERY SAVE" with the CH▼/CH▲
key, then press the [SELECT] soft key.
5. Press the CH▼/CH▲ key to select the
desired setting. You can select one from
"OFF", "50%", "70%", "80%", or "90%".
6. Press the [ENTER] soft key to store the
selected setting.
7. Press the CLR key to return to radio opera-
tion.

12.6 STROBE LED

This selection is used to switch and set the function of the strobe LED.

12.6.1 Emergency LED

1. Press the MENU key to display "MENU".
2. Select "SETUP" with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Select "CONFIGURATION" with the CH▼/
CH▲ key, then press the [SELECT] soft key.
4. Select "STROBE LED" with the CH▼/CH▲
key, then press the [SELECT] soft key.
5. Press the CH▼/CH▲ key to select "EMER-
GENCY LED", then press the [SELECT] soft
key.
6. Press the CH▼/CH▲ key to select the
desired setting. You can select one from
"CONTINIOUS", "SOS", "BLINK 1", "BLINK 2",
or "BLINK 3".
7. Press the [ENTER] soft key to store the
selected setting.
8. Press the CLR key to return to radio operation.
HX870E
GM SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
CONFIGURATION
ATIS SETUP
DIMMER
CONFIGURATION
LAMP
CONTRAST
BACK
KEY BEEP
BATTERY SAVE
STROBE LED
SOFT KEY
BACK SELECT
BACK
GM SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
CONFIGURATION
ATIS SETUP
DIMMER
CONFIGURATION
LAMP
CONTRAST
BACK
KEY BEEP
BATTERY SAVE
STROBE LED
SOFT KEY
BACK SELECT
WATER HAZARD LED
CONFIGURATION
EMARGENCY LED
CONTINIUS
BACK
SOS
BLINK1
BLINK2
BLINK3
BACK SELECT
SETUP
SELECT
CONFIGURATION
BATTERY SAVE
OFF
50%
70%
80%
90%
ENTER
SETUP
SELECT
CONFIGURATION
STROBE LED
EMERGENCY LED
SELECT
Page 93