Using The Sbh-12 Charger Cradle - Standard Horizon HX870E Owner's Manual

5.1.4 Using the SBH-12 Charger Cradle

1. Insert the DC plug from the SAD-
11C/U or E-DC-19A into the DC
jack at the bottom of the SBH-12.
Put the wire of the SAD-11C/U or
E-DC-19A into either of the left
or right hook at the bottom of the
SBH-12.
Wind one turn of the DC cable
around the supplied ferrite core,
and snap its two halves together
to the DC cable per the illustra-
tion.
2. Plug the SAD-11C/U into the AC
line outlet.
3. Insert the HX870E (with the
battery pack) into the SBH-12;
the antenna should be at the left
side when viewing the charger
from the front.
If the HX870E is inserted correct-
ly, the HX870E's LCD display will
show the battery charging icon.
A fully-discharged pack will be
charged completely in approxi-
mately 3 hours.
When charging is completed, the battery charging icon will disappear.
The SBH-12 is NOT designed to be waterproof. Charge the radio in
a dry location.
The SBH-12 is only designed for the charging of the HX870E's battery,
and is not suitable for other purposes. The SBH-12 may contribute
noise to TV and radio reception in the immediate vicinity, so we do not
recommend its use adjacent to such devices.
Page 14
As close as possible
CAUTION
NOTE
HX870E