Mitsubishi Electric FR-E700 Basic Instruction Manual page 145

To use the inverter outside of an enclosure in the environment of pollution degree 2, fix a fan cover with fan cover fixing
screws enclosed.
3.7K or less
Note, the protection structure of the Inverter units is considered to be an IP00.
∗On the input and output of the inverter, use cables of the type and size set forth in EN60204 Appendix C.
∗The operating capacity of the relay outputs (terminal symbols A, B, C) should be 30VDC, 0.3A. (Relay outputs are
basically isolated from the inverter internal circuit.)
∗Control circuit terminals on page 9 are safely isolated from the main circuit.
∗Environment
Ambient Temperature
Humidity
Maximum Altitude
Details are given in the technical information "Low Voltage Directive Conformance Guide" (BCN-A21041-203). Please contact your sales
representative.
136
Fan cover
fixing screw
Fan cover
Fan connection
connector
Fan
Example for FR-E740-3.7K
Running In Storage
-10°C to +50°C -20°C to +65°C
90% RH or less 90% RH or less
1000m 1000m
5.5K or more
Fan cover
fixing screws
Example for FR-E740-5.5K
During Transportation
-20°C to +65°C
90% RH or less
10000m
Fan cover
Fan
Fan connection
connector