Table of Contents
Advertisement
6 mm FRAMED PANEL DIMENSIONS
If you choose to install framed panels, they must
be cut to the dimensions shown. The panels will slide
into the frame on the door and grille.
Non-Dispenser Models
If the custom panel is less than 6 mm thick and it fits
loosely in the door frame it can be backed up with
a piece of filler material or foam tape to improve
the fit.
IMPORTANT NOTE: Maximum total panel weight:
• Fresh food door panel – 34 kg.
• Freezer door panel – 24 kg.
• Grille Panel – 8 kg.
IMPORTANT NOTE – DISPENSER MODELS
The refrigerator is supplied with two dispenser trims,
one for framed panels and one for overlay panels.
• If the panel is less than 6 mm thick, a noticeable gap
may be created around the dispenser trim. Foam
tape may be applied on the door to improve the fit.
A
Grille Panel
F
Dispenser
Cutout
G
Freezer
Fresh Food
Panel
Panel
D
E
Design Guide
Dispenser Cutout
B
391 mm
244 mm
C
Side-by-Side (in millimeters)
A
42" Models
1013 mm 241 mm 1737 mm 370 mm 624 mm
48" Models
1165 mm 241 mm 1737 mm 471 mm 675 mm
• If the panel is more than 6 mm thick, the dispenser
trim cannot be secured to the door.
See Dispenser Trim Fit Examples, page 9.
The framed panel must be 6 mm nominal thickness
to fit the dispenser trim.
B
C
D
7
8 mm
Trim
Door
Reveal
6 mm
Panel
Dispenser
Cutout Position
E
F
G
452 mm 79 mm
452 mm 130 mm
Advertisement
Table of Contents
