Step 3 Install Assembled Handles; Step 4 Install Dispenser Trim - Monogram ZPB480D Installation Instructions Manual

STEP 3 INSTALL ASSEMBLED HANDLES

• Slide the assembled panels into the door trim.
• Secure both trims using all the original screws.
Dispenser Models Only:
• The dispenser controls protrude beyond the face of
the freezer door. To avoid damage to the dispenser,
the trim at the top of the door should be removed.
• Remove the screws holding the top trim in place.
Lift off the trim.
• Place the freezer panel into the bottom channel
and slide into the hinge side trim.
• Reinstall the top trim piece with screws.
Tubular Stainless Steel Handles
Reinstall all original screws

STEP 4 INSTALL DISPENSER TRIM

For Dispenser Models Only:
There are two dispenser trims shipped with your
dispenser refrigerator. Note that the inside depth
of the frames are different. Choose the trim marked
19 mm overlay panels.
• Press and snap the dispenser trim into the dispenser
recess on the door.
22