Hood Sensor - HP EliteDesk 800 G3 TWR Maintenance And Service Manual
Business pc
Hide thumbs
Also See for EliteDesk 800 G3 TWR:
- Maintenance and service manual (154 pages) ,
- Hardware reference manual (59 pages) ,
- Disassembly instructions manual (11 pages)
Table of Contents
Advertisement
Hood sensor
The hood sensor is installed on the top, rear of the chassis.
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Disconnect the cable from the system board connector labeled HSENSE (1).
4.
Slide the hood sensor out of the slot on the rear of the chassis (2). A tool such as a screwdriver may be
required to pry the hood sensor from the slot.
To install the hood sensor, reverse the removal procedure.
(Preparation for disassembly on page
(Access panel on page
20).
19).
Hood sensor
63
Hide quick links:
Advertisement
Table of Contents
