Software Update
1) Press OPEN/CLOSE to open the disc tray.
2) Insert the update CD-R disc with the software update, label
facing up.
3) Press OPEN/CLOSE to close the disc tray.
* If you don't see the message above, try another disc.
Generally, this is caused by disc quality and by disc creating problem.
4) Press the ENTER button on the remote control (Fig. 3-7).
5) It takes about 5 minutes to complete the update.
The message below will be displayed in the screen after update is completed and the tray will open automatically.
6) After removing the update disc, turn off the unit with power button.
And there after turn on the unit with power button and then the will be closed.
The Flash update is now completed.
3-4
Fig. 3-6
Fig. 3-8
Fig. 3-9
Fig. 3-7 Remote Control
Atfer checking old and new version, select "Yes" or "No"
with "
" or "
" on the remote control.
* The Version is indicated by "YYMMDD.xx modelname"
* If the message to the left isn't displayed after 10minutes
and the unit is no longer functioning properly, contact a
samsung authorized service center.
Samsung Electronics