Use Auto Configuration to Set Up Your Internet
Connection
The first time that you use a web browser to access the gateway, the Auto Configuration
page displays. You can use Auto Configuration to detect the Internet connection, or you can
click the Cancel button to exit, and then log in to the gateway.
To use Auto Configuration:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Type http:/192.168.254.254.
The Auto Configuration page displays. The gateway detects your Internet connection.
3.
Follow the onscreen instructions to complete your Internet setup.
Rerun the Setup Wizard
After you install the gateway, you can rerun the Setup Wizard to detect your Internet
connection.
To rerun the Setup Wizard:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Type http:/192.168.254.254.
A login window opens.
3.
Enter the gateway user name and password.
The user name is admin. The default password is admin. The user name and password
are case-sensitive.
The Main page displays.
4.
Select Advanced.
5.
When prompted, click the Yes button to proceed.
The Advanced page displays.
6.
Select Re-Run Setup Wizard.
The Re-Run Setup Wizard page displays.
7.
Click the Detect Configuration button.
The gateway restarts and the Auto Configuration page displays.
8.
Follow the Setup Wizard onscreen instructions.
ADSL2+ Gateway
DRAFT
Specify Your Internet Settings
16