Wire (110 - Pro-Form PFEL57916.1 User Manual

9. Untie and discard the wire tie on the Main

Wire (110).

While a second person holds the Console (7)
near the Upright (4), connect the wires on the
Console to the Main Wire (110) and to the
Sensor Wires (63).
Insert the excess wire into the Upright (4).
10. Tip: Avoid pinching the wires. Attach
the Console (7) to the Upright (4) with four
M4 x 16mm Screws (101); start all the Screws,
and then tighten them.
9
7
110
10
101
12
63
4
7
Avoid pinching
the wires
4
101