Chapter 11: IPv6 DHCP Relay configuration
Use the Forward Path tab to configure the DHCP Relay forward path, and use the Interface tab to configure
the related parameters (for example, max hops and remote ID).
DHCP configuration navigation
•
Configuring the DHCP relay forwarding path
•
Configuring DHCP relay interface parameters
•
Viewing DHCP Relay statistics
Configuring the DHCP relay forwarding path
Configure forwarding policies to indicate the relay agent and the DHCP server to which packets
are forwarded.
Procedure steps
1. In the navigation tree, open the following folders: Configuration, IPv6.
2. Double-click DHCP Relay.
3. Click the Forward Path tab.
4. Click Insert.
5. In the AgentAddr box, type the agent address.
6. In the ServerAddr box, type the server address.
Configuration — IPv6 Routing
using Enterprise Device
Manager
on page 197
on page 195
on page 196
November 2010
195