Viewing Dhcp Relay Statistics - Avaya ERS 8800 series Configuration Manual

Variable
IfIndex
MaxHop
RemoteIdEnabled
DhcpEnabled

Viewing DHCP Relay statistics

View DHCP Relay statistics to monitor network performance.
Procedure steps
1. In the navigation tree, open the following folders: Configuration, IPv6.
2. Double-click DHCP Relay.
3. In the Interface tab, select an interface and click Statistics.
Variable definitions
Use the data in the following table to use the DHCP Relay Statistics tab.
Variable
NumRequests
NumReplies
Configuration — IPv6 Routing
A read-only value indicating the unique value to identify an IPv6
interface. For the brouter port, it is the ifindex of the port and, in the
case of the VLAN, it is the ifindex of the VLAN.
Specifies the maximum number of hops a DHCP packet can take
from the DHCP client to the DHCP server.
Enables or disables remote ID.
Specifies whether DHCP is enabled or disabled on the interface.
The count of request messages.
The count of reply messages.
Viewing DHCP Relay statistics
Value
Value
November 2010 197