Maintaining Hdlc And Ip-Trunk Configuration - Huawei Quidway S9300 Configuration Manual - Wan Access

Terabit routing switch
Table of Contents

Advertisement

Quidway S9300 Terabit Routing Switch
Configuration Guide - WAN Access
Example
Run the display interface ip-trunk command. If the physical status, link protocol status, IP
address, and load-balancing mode of the IP-Trunk interface are displayed, it means the
configuration succeeds. For example:
<Quidway> display interface ip-trunk 10
Ip-Trunk10 current state : DOWN
Line protocol current state : DOWN
Description:HUAWEI, Quidway Series, Ip-Trunk10 Interface
Route Port,Hash arithmetic : According to SIP-XOR-DIP, Maximal BW: 155M, Current
BW: 0M, The Maximum Transmit Unit is 4470
Internet Address is 2.2.2.2/24 Link layer protocol is nonstandard HDLC
Physical is IP_TRUNK
-----------------------------------------------------
PortName
-----------------------------------------------------
Pos2/1/2
-----------------------------------------------------
The Number of Ports in Trunk : 1
The Number of UP Ports in Trunk : 0
Run the display trunkmembership ip-trunk command. If the member interfaces, number of
members, and number of Up members are displayed, it means the configuration succeeds. For
example:
<Quidway> display trunkmembership ip-trunk 1
Trunk ID: 1
TYPE: pos
Number Of Ports in Trunk = 1
Number Of UP Ports in Trunk = 0
operate status: down
Run the display trunkfwdtbl ip-trunk command. You can view the forwarding table of an IP-
Trunk interface.
<Quidway> display trunkfwdtbl ip-trunk 1
Ip-Trunk1's forwarding table is:
Pos5/0/1
Pos5/0/1
Pos5/0/1
Pos5/0/1
Pos5/0/1
Pos5/0/1
Pos5/0/1
Pos5/0/1

3.5 Maintaining HDLC and IP-Trunk Configuration

This section describes how to maintain HDLC. Detailed operations include clearing the statistics
about the HDLC interfaces.
Issue 02 (2011-07-15)
Last 300 seconds input rate 0 bits/sec, 0 packets/sec
Last 300 seconds output rate 0 bits/sec, 0 packets/sec
Realtime 0 seconds input rate 0 bits/sec, 0 packets/sec
Realtime 0 seconds output rate 0 bits/sec, 0 packets/sec
Input: 0 packets,0 bytes,
0 unicast,0 broadcast,0 multicast
0 errors,0 drops,0 unknownprotocol
Output:0 packets,0 bytes,
0 unicast,0 broadcast,0 multicast
0 errors,0 drops
Input bandwidth utilization
Output bandwidth utilization : 0.00%
Status
DOWN
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 HDLC and IP-Trunk Configuration
: 0.00%
Weight
1
47

Advertisement

Table of Contents
loading

Table of Contents