Removal
1)
Remove the SOLENOID FEED (PL15.4.17). (RRP3.1)
2)
Remove the SPRING FEED H (PL15.4.10). (RRP3.2)
3)
Remove the SPRING FEED 1 (PL15.4.9). (RRP3.3)
4)
Remove the GEAR FEED H2 (PL15.4.11). (RRP3.4)
5)
Remove the GEAR FEED 1 (PL15.4.8). (RRP3.5)
6)
Remove the GEAR FEED H1 (PL15.4.12). (RRP3.6)
7)
Remove the GEAR FEED 2 (PL15.4.13). (RRP3.7)
8)
Remove the STOPPER CLUTCH (PL15.4.16). (RRP3.8)
9)
Remove the CLUTCH ASSY TURN (PL15.4.18).
Replacement
Replace the components in the reverse order of removal.
When replacing, the claw of the CLUTCH ASSY TURN (PL15.4.18) must face the right,
and the harness must face the left.
Chapter 3 Removal and Replacement Procedures
3-85