Konica Minolta MAGICOLOR 3300 Service Manual page 83

Removal
1) Remove the SOLENOID FEED (PL15.4.17). (RRP3.1)
2) Remove the SPRING FEED H (PL15.4.10). (RRP3.2)
3) Remove the SPRING FEED 1 (PL15.4.9). (RRP3.3)
4) Remove the GEAR FEED H2 (PL15.4.11). (RRP3.4)
5) Remove the GEAR FEED 1 (PL15.4.8). (RRP3.5)
6) Remove the GEAR FEED H1 (PL15.4.12). (RRP3.6)
7) Remove the GEAR FEED 2 (PL15.4.13). (RRP3.7)
8) Release the claw and remove the STOPPER CLUTCH (PL15.4.16).
Replacement
Replace the components in the reverse order of removal.
When replacing, secure the CLUTCH ASSY TURN (PL15.4.18), meeting the leading end
of STOPPER CLUTCH (PL15.4.16) with the claw of the CLUTCH ASSY TURN
(PL15.4.18).
Chapter 3 Removal and Replacement Procedures
3-83