Konica Minolta MAGICOLOR 3300 Service Manual page 61

Removal
1) Remove the CASSETTE of the TRAY 2. (RRP1.1)
2) Remove the COVER FRONT. (RRP1.1)
3) Remove the COVER R (PL15.2.2). (RRP1.2)
4) Remove the COVER L (PL15.2.1). (RRP1.3)
5) Remove the CHUTE ASSY TURN (PL15.3.7). (RRP1.4)
6) Remove the COVER CST SLIDE (PL15.3.8). (RRP1.6)
7) Remove the HARNESS ASSY FDR2T (grey) (LP14.5.3). (RRP1.5)
8) Remove the DRIVE ASSY FEEDER SINGLE (PL15.5.5). (RRP1.7)
9) Remove the INDICATOR ASSY (PL15.5.8). (RRP1.8)
10) Remove the BRACKET LOW PAPER (upper and lower 2 pcs). (RRP1.11)
11) Remove the PWBA OPTFDR (PL15.5.1). (RRP1.10)
12) Remove the GUIDE ASSY CASSETTE R (PL15.3.2). (RRP1.11)
13) Release 3 claws securing the SENSOR PHOTO (PL15.5.6) to the OPTION FEEDER frame and
remove the sensor photo.
Replacement
Replace the components in the reverse order of removal.
When replacing, secure the left side claw and then replace the claw on the right side.
Chapter 3 Removal and Replacement Procedures
3-61