Removal
1)
Remove the SOLENOID FEED (PL15.4.17). (RRP3.1)
2)
Remove the SPRING FEED H (PL15.4.10). (RRP3.2)
3)
Remove the SPRING FEED 1 (PL15.4.9). (RRP3.3)
4)
Remove the GEAR FEED H2 (PL15.4.11). (RRP3.4)
5)
Remove the GEAR FEED 1 (PL15.4.8). (RRP3.5)
6)
Remove the GEAR FEED H1 (PL15.4.12). (RRP3.6)
7)
Remove the GEAR FEED 2 (PL15.4.13). (RRP3.7)
8)
Remove the STOPPER CLUTCH (PL15.4.16). (RRP3.8)
9)
Remove the CLUTCH ASSY TURN (PL15.4.18). (RRP3.9)
10) Remove the GEAR IDLER (PL15.4.15). (RRP3.10)
11) Remove the GEAR IDLER FEED (PL15.4.14). (RRP3.11)
12) Remove the BEARING (ø6×L8)/METAL (PL15.4.7) attached to the SHAFT FEED 2 (PL15.4.22).
(RRP3.17)
13) Remove the BEARING (ø6×L8)/BLACK (PL15.4.21) attached to the SHAFT FEED 2 (PL15.4.22).
(RRP3.18)
14) Remove the SHAFT FEED 2 (PL15.4.22).
Replacement
Replace the components in the reverse order of removal.
Chapter 3 Removal and Replacement Procedures
3-109