Siemens SINUMERIK 840D sl Operating Manual page 21

Key
Universal
Operating Manual, 02/2011, 6FC5398-6AP40-0BA0
Function
+ + <CTRL> + <SHIFT> + <L>
Scrolls the actual operator interface through all installed
languages in the inverse sequence.
+ <CTRL> + <P>
Generates a screenshot from the actual operator interface and
saves it as file.
+ <CTRL> + <S>
Switches the single block in or out in the simulation.
+ <CTRL> + <V>
 Pastes the text from the clipboard at the actual cursor
 Pastes text from the clipboard at the position of a selected
+ <CTRL> + <X>
Cuts out the selected text. The text is located in the clipboard.
+ <CTRL> + <Y>
Reactivates changes that were undone (only in the program
editor).
+ <CTRL> + <Z>
Undoes the last action (only in the program editor).
+ + <CTRL> + <ALT> + <C>
Creates a complete archive on an external data carrier (USB-
FlashDrive).
+ + <CTRL> + <ALT> + <S>
Creates a complete archive on an external data carrier (USB-
FlashDrive).
+ + <CTRL> + <ALT> + <D>
Backs up the log files on the USB-FlashDrive. If a USB-
FlashDrive is not inserted, then the files are backed-up in the
manufacturer's area of the CF-Card.
position.
text.
Introduction
1.2 Operator panel fronts
21