Skip levels, activate
Select the corresponding check box to activate the desired skip level.
Note
The "Program control - skip blocks" window is only available when more than one skip level
is set up.
Procedure
Universal
Operating Manual, 02/2011, 6FC5398-6AP40-0BA0
Software option
In order to have more than two skip levels, for 828D you require the
"Extended operator functions" option.
1.
Select the "Machine" operating area.
2.
Press the <AUTO> or <MDA> key.
3
Press the "Prog. ctrl." and "Skip blocks" softkeys.
The "Program control" window appears and shows a list of skip levels.
Machine the workpiece
4.8 Controlling the program run
109