Siemens SINUMERIK 840D sl Operating Manual page 195

Icons in the tool list
Icon/
Marking
Tool type
Red "X"
Yellow triangle pointing
downward
Yellow triangle pointing
upward
Green border
Magazine/location number
Green double arrow
Gray double arrow
(configurable)
Red "X"
Procedure
Universal
Operating Manual, 02/2011, 6FC5398-6AP40-0BA0
1. Select the "Parameter" operating area.
2. Press the "Tool list" softkey.
The "Tool list" window is opened.
Meaning
The tool is disabled.
The prewarning limit has been reached.
The tool is in a special state.
Place the cursor on the marked tool. A tooltip provides a
short description.
The tool is preselected.
The magazine location is positioned at the change position.
The magazine location is positioned at the loading position.
The magazine location is disabled.
Tool management
9.5 Tool list
195