Displaying Simulation Alarms - Siemens SINUMERIK 840D sl Operating Manual

Simulating machining

5.9 Displaying simulation alarms

5.9 Displaying simulation alarms
Alarms might occur during simulation. If an alarm occurs during a simulation run, a window
opens in the operating window to display it.
The alarm overview contains the following information:
● Date and time
● Deletion criterion
● Alarm number
● Alarm text
Precondition
Simulation is running and an alarm is active.
Procedure
154
Specifies with which softkey the alarm is acknowledged
1. Press the "Program control" and "Alarm" softkeys.
The "Simulation Alarms" window is opened and a list of all pending
alarms is displayed.
Press the "Acknowledge alarm" softkey to reset the simulation alarms
indicated by the Reset or Cancel symbol.
The simulation can be continued.
- OR -
Press the "Simulation Power On" softkey to reset a simulation alarm
indicated by the Power On symbol.
Operating Manual, 02/2011, 6FC5398-6AP40-0BA0
Universal