General - Sharp AQUOS LE580X Series Operation Manual

<< TV Setup Operation

General

Auto installation
When the TV is powered on for the first time after purchase, the initial auto
installation wizard appears. Follow the menus and make the necessary
settings one after another.
Confirm the following before turning on the power
Is the antenna cable connected?
Is the AC cord plugged in?
1 Press POWER on the TV.
The initial auto installation wizard appears.
2 Setting the OSD language.
x Press / to select the desired language, and then press (ENTER).
3 Press / to select your Wi-Fi network.
4 Press / to view Google Terms of Service and Google Privacy
x Policy.
5 Press "YES" or "NO" to allow Google use your device location.
6 Press "YES" or "NO" to set permission for Google to use your TV
diagnosis and usage data.
7 Press / to view Sharp Terms of Use and Sharp Privacy Policy.
ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA
8 Selecting the location of the TV.
x Press / to select where you will use this TV, and then press
x (ENTER).
HOME:
Settings are optimised for normal home viewing and energy efficiency.
"STANDARD" will be the default value for the "AV mode" setting.
STORE:
Settings are designed for maximum impact in retail store displays.
"DYNAMIC (Fixed)" will be the default value for the "AV mode" setting.
If the "AV mode" is changed, the TV will automatically switch back to
"DYNAMIC (Fixed)" when there is no operation using the TV or remote
control unit for 30 minutes.
NOTE
STORE: A demonstration image will be displayed after initial auto
installation is completed. If you have chosen "STORE" by mistake, go to
"General" > "Factory Reset - TV" > "Yes" > select "HOME" again.
9 Setting the country.
x Press / to select your country or area, and then press
x (ENTER).
This setting screen only appears during the initial auto installation.
NOTE
Digital (DVB-T/T2) broadcasting cannot be viewed in the area where
digital broadcasting is not yet launched.
DTV concerned menu may not displayed in some country.
10 Please select / to start TV channel setup.
11 Starting Channel Search. Go to "General" > "Channel Search".
EN 3-26
>>