Devices Operation; Video In - Sharp AQUOS LE580X Series Operation Manual

<< Devices Operation
ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA
Video In
Audio Select
This function sets the terminal to output the
computer audio.
The adjustment items vary depending on the
input source. Select the input source
corresponding to the terminal connected to the
PC and then adjust the desired item.
To perform the operation, refer to "Devices" >
"Video in" > "HDMI 3" > "Audio Select".
HDMI 3
HDMI(Digital): Select this when the TV and
PC are connected using an HDMI-certified
cable and audio is input via the same
cable.
HDMI+Analog: Select this when the TV and
PC are connected using a HDMI-certified
cable and the audio is input via
INPUT 5 (L/R).
NOTE
When "Audio Select" is set to
"HDMI+Analog", sound will not be produced
if you use only an HDMI-certified cable to
connect HDMI-compatible equipment. To
produce sound, you should make an analog
audio connection.
If you want to connect HDMI-compatible
equipment using only an HDMI-certified
cable, set "Audio Select" to "HDMI(Digital)".
"Audio Select" can only be set for the
HDMI IN 3.
EN 4-1
>>