Advanced Settings - D-Link DSL-3682 User Manual

Section 3 - Configuration
Click 2.4G Advanced Wireless on the navigation menu to configure the advanced wireless
settings.
If you Enable Wireless, the following 2.4 GHz wireless configuration options are available:
ADVANCED WIRELESS SETTINGS
Transmit Power: Set the transmit power of the antennas in percentage.
Beacon Period: Set the AP advertisement frame interval.
RTS Threshold: This value should remain at its default setting of 2346. If inconsistent
data flow is a problem, only a minor modification should be made.
Fragmentation The fragmentation threshold, which is specified in bytes, determines
Threshold: whether packets will be fragmented. Packets exceeding the 2346 byte
setting will be fragmented before transmission. 2346 is the default
setting.
DTIM Interval: DTIM range can be set from 1 to 255. A delivery traffic indication
message(DTIM) is a kind of traffic indication message (TIM) which
informs the clients of the presence of buffered multicast/broadcast
data on the access point.
Preamble Type: Use the drop-down menu to specify whether the router should use
the Short Preamble or Long preamble type. The preamble type
defines the length of the CRC (Cyclic Redundancy Check) block for
communication between the router and roaming wireless adapters.
D-Link DSL-3682 User Manual

Advanced Settings

WIRELESS ENABLE
DSL-3682 ADVANCED
2.4G Advanced
ADVANCED SETTINGS
Wireless
ADVANCED SETTINGS
Internet Setup
These options are for users who wish to change the behavior of their 802.11g wireless radio from the standard setting. It is not
recommended to modify these settings from the factory defaults. Incorrect settings may affect your wireless performance. The default
settings usually provide the best wireless performance in most environments.
2.4G Wireless
WIRELESS ENABLE
☑
5G Wireless
Enable Wireless
Local Network
ADVANCED WIRELESS SETTINGS
Transmit Power : 100%
Local IPv6 Network
Beacon Period : 100
RTS Threshold : 2346
Time and Date
Fragmentation Threshold : 2346
DTIM Interval : 1
Logout
Preamble Type : short
SSID
SSID : Your_2.4G Wi-Fi_Network
Visibility Status : ž Visible š Invisible
User Isolation :
Off
Disable WMM Advertise :
On
Max Clients : 16
GUEST/VIRTUAL ACCESS POINT- 1 - 3
☐
Enable
SSID : Your_Guest_Wi-Fi_Network
Visibility Status : ž Visible š Invisible
User Isolation : Off
Disable WMM Advertise : On
Max Clients : 32
Apply Cancel
MANAGEMENT
▼
(20 ~ 1023)
(1 ~ 2347)
(256 ~ 2346)
(1 ~ 255)
▼
▼
▼
(1 ~ 32)
▼
▼
(1 ~ 32)
64